Is Your Block Suitable for Dual Occupancy in Melbourne's West?
This is the number one myth we hear: "I've got 800 square metres, so I'm sweet." Unfortunately, land size is only the starting point for a dual occupancy site assessment.
Councils don't just look at how much dirt you own. They look at its shape, how wide it is at the street, what's buried under it, and what planning controls sit over the top.
For example, an 800 sqm block with a skinny 10 metre frontage can be a nightmare for a tandem (front-and-rear) layout. Once you squeeze in a compliant driveway next to the front home, there's often not enough room left for a second dwelling once setbacks and overshadowing rules are applied.
In other words, bigger isn't always better. Better is better.
Can I build two houses on my block in Melbourne?
There are a few things we check when assessing a block:
Frontage
Side-by-side duplexes generally want a wider frontage, often 15 to 18 metres or more depending on the council, so both homes get a decent street presence and their own crossover without the front of the property turning into a wall of garage doors. Longer, narrower blocks tend to suit tandem layouts, where one home sits behind the other. These need enough depth and side clearance for a driveway, a pedestrian path and some landscaping to soften things up.
Zoning
Most residential land in the west and north-west sits in the General Residential Zone or the Neighbourhood Residential Zone. Your zone sets the rules on building height, site coverage and minimum garden area, so it shapes what you can build before you've even picked a facade.
Overlays
Overlays are the fine print on top of your zone, and they can change everything. Heritage overlays, for example, are common in places like Essendon and Footscray, and can limit facade materials, upper-storey bulk and demolition.
Setbacks and neighbours
Under Clause 55 (ResCode), front setbacks must align with neighbouring homes, while side and rear setbacks depend on wall height and length. The aim is to avoid unreasonable visual bulk and overshadowing next door.
Easements and what's underground
Drainage and sewerage easements create no-go corridors. Building a permanent home over a registered easement is generally restricted by water authorities and councils. Your title will show what's registered, and it's one of the first documents we pull.
Driveway access and parking
Driveways need decent separation from street trees, power poles and intersections. For tandem layouts, the internal driveway typically needs to be about 3 metres wide, with enough turning room for cars to drive out forwards, in line with Australian Standard AS2890. If a street tree or pole sits exactly where your crossover wants to be, it's worth finding out early.
Privacy and overlooking
Upper-storey windows and balconies that look into a neighbour's private open space generally need obscure glazing or permanent screening up to 1.7 metres above floor level. Good design handles this elegantly. Poor design bolts on awkward screens at the end and hopes for the best.
What approvals are required?
A typical dual occupancy involves three separate sign-offs:
Planning permit from your council, covering land use, building placement and bulk.
Subdivision approval, if you want to split the title so each home can be owned or sold separately.
Building permit from a registered building surveyor, confirming compliance with the National Construction Code before work starts.
A dual occupancy is not the same as a "small second dwelling", which sits under different rules and title arrangements in Victoria.
Check first, design second, demolish last
Here's the order we'd always recommend: assess the site, then design, then get approvals, and only then knock anything down.
Plans drawn without checking the title, soil, overlays, and services often come back from council with a long list of requests. Redesigning costs time and professional fees. Demolishing early is even riskier. Your existing home might be earning rent or giving you somewhere to live, and you're still paying mortgage interest, council rates, and land tax. If a hidden constraint then limits you to one dwelling, the demolition cost is gone for good.
A feasibility assessment up front sets clear boundaries for budget, layout and buildability, before you've spent real money.
Different councils have different priorities
Where you are in the west matters. Moonee Valley (Essendon, Niddrie, Keilor East, Airport West, Avondale Heights, Moonee Ponds) tends to focus on neighbourhood character, heritage and slope. Maribyrnong (Footscray, Yarraville, West Footscray) often focuses on infill density, narrow frontages, and heritage streetscapes. Brimbank (Sunshine, St Albans, Keilor Downs, Tullamarine) puts weight on garden areas, infrastructure capacity and stormwater. Knowing what your council cares about helps shape a design that runs more smoothly.
The dual occupancy feasibility Melbourne trusts
One of the biggest headaches in dual occupancy is when the designer, town planner, and builder all work separately. Information gets lost, cost estimates drift, and timelines blow out.
At Jem Homes, we are based in Keilor East and have more than 15 years of industry experience designing and building custom dual occupancies across Melbourne's west. We bring site feasibility, architectural design, council planning management and construction together under one roof, so you deal with one team that's accountable from the first site visit to handover. Our ten-step design-and-build process walks you through site inspection, concept development, council approvals, showroom selections and construction, so you always know what's next.
We'll tell you honestly what your block can and can't do, and what your realistic options look like. If you're thinking about two homes on your land, start with the facts, and book an initial consultation. We'll check your block's suitability before you commit to drawings, demolition or a big spend.